The Center possesses various types of measurement and test instruments used for measurement and testing of components, subassemblies and finished products.To assure the accuracy of measurement values and reliability, measurement instruments are required to be calibrated on a periodical basis. Furthermore, in order to resolve instrument calibration capabilities to fully meet the service requirements of the industrial sector. Except for the calibration of AC & DC voltage, current, power, impedance, length, weight, temperature-Humidity  torque  frequency and pressure, the Center specializes in research and development into acoustic Video and RF measurement. At present, the calibration system service provided to the public consists of speaker/microphone test system, telephone test system, acoustic test system, color TV test system and the EMI/EMC test system.

Currently, eight categories, electric, temperature, mass, dimension, acoustics, frequency microwave power, humidity of the calibration room are approved by the CNLA.The laboratory center also have the calibration in Hsinchu Taichung and Tainan they can provide the service of instrument calibration.

Calibration items performed by current instruments and equipment:

一、Electrical Area:

  1.  RLC Meter/Bridge/MΩ Meter.
  2.  AC/DC/Volt-Ammeter/Calibrator/Power Meter/μA Meter.
  3.  Speaker/Telephone test system & measurement instruments.
  4.  TV/VTR test/measurement instruments & test instruments for TV station (e.g. Oscilloscope, Modulation Meter, Pattern Generator, Signal Generator).
  5.  Radio/Tape Recorder testing instruments, Puncture/Insulation Tester, Audio Analyzer.
  6.  Test/Measurement for EMC equipment (LISN, Test Receiver, Power Amplifier).
  7.  Test/Measurement for Safety equipment (e.g. Puncture/Insulation Tester, Resistor Bridge).
  8.  Stroboscope/Rotatemeter/Contact RPM Meter.
  9.  Network Analyzer/RF High Power Meter/Mobile Phone test instruments.
  10.  Generator/Counter/Spectrum Analyzer/RF Power Meter.
  11.  High Voltage eguipment: High Voltage Meter, Turn Ratio Tester.

二、Dimension Area : Block Gauge, Caliper, Micrometer, Height Gauge, Pin Gauge, Dial Indicator, Dial Indicator  

       Calibrator, Steel Metric, Ring Gauge, Angle Gauge, Thread Plug Gauge.

三、Weight Area : Standard Weight, Balance.

四、Temperature Area : Glass Thermometer, Thermocouple, RTD, Digital Thermal Meter, Temperature Calibrator,         

       Temperature Recorder, Thermo-Hygrometer, Thermo-Hygrograph.

五、Force Area : Pull-Push Gauge, Tension Gauge, Torque Meter, Torque Driver, Torque Wrench, Pressure Gauge (Air  

       Type & Oil Type).

六、Sound Area : Sound Calibrator, Pistonphone, Standard Microphone, Sound Level Meter, Dose Meter, Product Acoustic  Noise measurement, Environment Acoustic Noise measurement.

七、Chemical Area : PH Meter, Specific Gravity, Conductivity Meter, Viscometer, Pipen.

八、On-Site Calibration Service : Chamber Oven, Vibration Machine, Sparker, Material Test Machine, Granite Table,  

       Puncture Tester, Hydrometer, Profile Projector, Pressure cooker .

九、Electronic-magnetic Area : Microware Power Meter, Microwave Power Sensor, Half-wave Antenna, Biconical   

       Antenna, Log-periodic Antenna, Horn Antenna.

十、Optical Area : Illuminance Meter, UV Intensity Meter.

For more information, please contact:

 

[ Other Services ]