[HOME]
(ETC is commissioned by DGT for approving the certificate of TTE)
TTE Certificate
Certificate of Compliance Approval for TTE
Drawing Method
for Certificate Mark
Drawing method for TTE
Certificate mark:
 |
 |
1. This drawing is regulated according to the regulation of Section 1, Article 16 of the Compliance Approval Regulations of Telecommunications Terminal Equipment.
2. There is no size restriction on the Mark, but the Mark shall be affixed or marked at the appropriate position on the main body in appropriate proportion (lattice).
3. If the product is too small to put the mark on it, the mark should be put on the smallest package.
4. The certification mark shall be attached to the product according to the regulation. The color of mark shall be single, clear and distinguishable.
Example of
certificate label and number shown as follow:
Use and Manage of Certificate
After approved by ETC, the vendor should prepare
labels according to the form of Approval Label stipulated in the certificate of
approval, and affix or mark the label at the appropriate position on the main
body of the approved TTE prior to sale.
When
the aforementioned TTE extends its telecommunications interfaces and does not
affect the function of the approved telecommunications interfaces, it is
permitted to conduct the compliance approval only upon the part of extension.
Once
the relevant TTE technical specifications are amended, the approved TTE shall be
re-submitted for compliance approval according to the effective date and the way
of implementation as promulgated in the amended technical specifications.
Those
who have lost or damaged their TTE approval certificates issued by ETC may apply
for re-issue or replacement to ETC.
ETC
should perform market surveillance activities on the TTE from time to time.
After granting certificate of approval for TTE,
ETC may revoke or rescind the said certificate under one of the following
conditions:
1. Failure to re-submit application for compliance approval when the approved TTE does not comply with the relevant technical specifications with a substantial modification in respect of model number, design and function.
2. Once the relevant technical specifications are amended, the approved equipment fails to be re-submitted for compliance approval according to the effective date and the way of implementation as promulgated in the said technical specifications
3. Data/information attached to the application package is found to be counterfeited or false.
4. After market surveillance, the TTE doesn't comply with the relevant technical specifications.
Once
certificate of approval is revoked or rescinded, DGT should announce in public
the original holder of the certificate of approval and the matter of revocation
or rescission. The original holder shall not be permitted to re-submit an
application for approval within three months, including all products the
original holder holds.
According to Article 67 of Telecommunications
Act, those who import or market any TTE without compliance approval should be
fined NT$30,000 to NT$300,000, and their equipment should also be confiscated.
Electronics Testing Center, Taiwan is
commissioned by DGT for issuing the certificate of approval, and certify
equipment under the name of ETC.
According
to Section 2, Article 24 of Consumer Protection Law, the mark and manual of the
imported products or service should be Chinese and not fall shorter than them at
original location. For protecting the right of the consumers, the applicant
imported TTE should prepare the approval certificate and Chinese user
manual prior to sale.